series 600 dip headers with coined contacts features: ? aries offers a full line of dip headers, available with either coined or screw machine contacts. consult data sheet no. 12035 for screw machine contacts. ? snap-on, protective covers are available for all sizes shown below and accommodate .125 [3.18] to .750 [9.05] compo- nent heights. consult data sheet no. 12033 for protective covers. ? body cavity design provides additional clearance for compo- nent mounting. specifications: ? standard body material is black ul 94v-0 4/6 nylon. ? coined contacts are brass, 1/2 hard. ? contact plating: - t = 200u? [5.08 m] min. matte tin per astm b545-97 over 50u? [1.27 m] min. nickel per qq-n-290 - g = 10u?[.25 m] gold per mil-g-45204 over 50u?[1.27 m] min. nickel per qq-n-290. - tl = 200u?[5.08 m]90/10 tin/lead per mil-t-10727 type i over 50u? [1.27 m] min. nickel per qq-n-290. ? contact current rating=2 amps. ? operating temperature=221f [105c] tin plating, =257f [125c] gold plating. ? fork contact accepts up to .025 [.64] diameter leads. mounting considerations: ?suggested pcb hole size=.035 .002 [.89 .05] dia. a ll dimensions : inches [ millimeters ] all tolerances .005 [.13] unless otherwise specified .300 [7.62] centers body (with numbered pin positions, no ribs) centers ?c? dim. ?d? dim. ?e? .300 [7.62] .395 [10.03] .252 [6.40] .400 [10.16] .495 [12.57] .352 [8.94] .600 [15.24] .695 [17.65] .552 [14.02] ?a?=(no. of pins per row x .100 [2.54]) + .050 [1.27] ?b?=(no. of pins per row - 1) x .100 [2.54] consult data sheet no. 12033 for snap- on protective covers. consult data sheet no. 12035 for screw machine contacts. note: aries specializes in custom design and production. in addition to the standard products shown on this page, special materials, platings, sizes, and configurations can be furnished, depending on quantities. aries reserves the right to change product specifications without notice. ordering informa tion xx-600-xx series plating: 0=tin 0tl =tin/lead 1=gold pin style: 1=fork pin 2=post pin no. of pins: .300 [7.62] centers: 4 thru 20 .400 [10.16] centers: 22 .600 [15.24] centers: 24, 28, 40 .400 [10.16] and .600 [15.24] centers body (with ribs) 12032 rev.f printouts of this document may be out of date and should be considered uncontrolled frenchtown, nj usa tel: (908) 996-6841 fax: (908) 996-3891 http://www.arieselec.com ? info@arieselec.com abc
|
